Is it normal for a heat gun to smoke

If the device blows cool air and does not produce heat when powered on, it is because of a faulty or broken heating coil.

The best fix for this problem is to open up the casing and replace the heating coil. It is normal for the device to smell like burning plastic when powered on for the first time. Between device production and consumer use, dust collects on the heating elements.

If the device smells like burning plastic shut it off immediately. Continued use of the device while wires touch the heating coils may result in damage to the wire insulation. If the device produces heat, but does not blow air, replace the fan. This is an especially important problem to fix quickly because a faulty fan can cause the heating coil to overheat and burn internal wiring and plastic.

Black comes off on rags but nothing works to make the plastic un-sticky. The handle must be made out of a bad plastic mixture. That's the plasticiser leaching out of the plastic.

To fix it, take a clean rag soaked in rubbing alcohol and vigorously wipe down the handle. You want to rub off all the rubber coating and just leave the hard plastic underneath exposed. The rubber coating is only a fraction of a millimeter thick but it'll take a lot of rubbing and a lot of alcohol, and you'll probably use several rags as the sticky stuff tends to coat the rag while you're working. Once done the handle will be rescued for good. First time I used it it shut off in the middle of what I was doing and has not come back on yet.

What can I do to fix it? Fix Your Stuff Community Store. Edit Options History. Due to the high current draw, extension cords may overheat and pose a risk of a fire or electric shock. Never obstruct or cover the air inlet grills. If the air flow is reduced the heat gun will overheat and possible catch fire.

Never operate the heat gun with the outlet nozzle directly against a surface, this will reduce the air flow and can have the same effect as obstructing the air inlet grills.

Safety considerations you should keep in mind when using a heat gun. Accidents have occurred at Princeton University due to improper use heat guns. The two most notable accidents involved heat guns used in the presence of flammable solvents resulting in extensive damage and property loss. Joan Hutzly Laboratory Safety Specialist Steve Elwood Associate Director Heat Gun Selection and Use in Research Labs A heat gun is similar in appearance to a standard hairdryer, but is operated and used in a vastly different manner.

Other applications for heat guns include: removing paint soldering curing epoxy resins removing ice accumulation heat shrink tubing application removing decals and stickers softening, molding and welding plastic materials accelerate evaporation Basic heat guns have one heat setting and one fan speed and are designed primarily for paint stripping.

Keep in mind the presence and direction of the heat produced Always switch the tool off before putting it down on any surface. Allow the tool to cool before storing it. Never touch the hot metal nozzle with clothing or skin. Do not insert anything down the nozzle of the gun. Never block the inlet grill or obstruct the air flow of the unit while in operation Accidents involving Heat Guns Accidents have occurred at Princeton University due to improper use heat guns.

A Toaster, an electric stove, an iron, or a curling iron can be used to melt the embossing powder. Simply apply the embossing powder to the paper or cardboard and then carefully hold the powder close to the heating element, without touching it, to melt it.

It really depends on the need. Your need is to release the adhesive on your mobile phone. A hair dryer will work but only apply heat a few seconds at a time. When using your heat gun in a dusty area, clean the gun periodically during use and after work is completed with compressed air. Never allow water to come in contact with the heating element. The heat guns, which contain asbestos heat shields in the barrel, emit asbestos fibers during use.

Although the product resembles and functions like a hand-held hair dryer, it cannot be used to dry hair because the gun emits air heated as high as degrees Farenheit. Hot melt or hot glue is designed to be melted with a glue gun. This glue is sometimes called thermoplastic adhesive. Hot glue guns use continuous heating elements to melt the adhesive. Skip to content Is a heat gun supposed to smoke? Can a hair dryer work as a heat gun? What is a lighter duty heat gun similar to?

A lighter duty heat gun is similar to a portable Hair dryer. When should you not use a heat gun? Why is my heat gun not heating up? How hot is a heat gun on high?

Is a heat gun the same as a glue gun? Can you melt metal with a heat gun? What temperature is a heat gun?